It appears that you are currently in USA.
VITA SUPRINITY PC is a zirconia-reinforced, high-strength generation of glass ceramics. The glass ceramic is characterized by a particularly fine-grained and homogenous microstructure that facilitates excellent material quality, and a consistently high load capacity and long-term reliability.
VITA SUPRINITY® PC
Glass ceramic. In a natural esthetic.
Highly esthetic
Translucency, opalescence and fluorescence create an outstanding play of color and light.
Highly accurate
Simple processing, thanks to good polishing characteristics and high firing stability for accurate results.
Reliable
A zirconia-reinforced glass-ceramic matrix
ensures a high level of safety for reconstructions.
- Posterior crown
- Anterior crown
- Implant-supported crown
- Veneer
These are recommended indications. The entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective instructions for use of the products.
VITA SUPRINITY® PC products
VITA SUPRINITY® PC VITA SYSTEM 3D-MASTER
| Description | Prod. no. 5 pcs. |
|---|---|
| 0M1-T, PC-14 |
EC4S010001 12 x 14 x 18 mm |
| 1M1-T, PC-14 |
EC4S010004 12 x 14 x 18 mm |
| 1M2-T, PC-14 |
EC4S010005 12 x 14 x 18 mm |
| 2M2-T, PC-14 |
EC4S010009 12 x 14 x 18 mm |
| 3M2-T, PC-14 |
EC4S010016 12 x 14 x 18 mm |
| 4M2-T, PC-14 |
EC4S010023 12 x 14 x 18 mm |
| 0M1-HT, PC-14 |
EC4S010101 12 x 14 x 18 mm |
| 1M1-HT, PC-14 |
EC4S010104 12 x 14 x 18 mm |
| 1M2-HT, PC-14 |
EC4S010105 12 x 14 x 18 mm |
| 2M2-HT, PC-14 |
EC4S010109 12 x 14 x 18 mm |
| 3M2-HT, PC-14 |
EC4S010116 12 x 14 x 18 mm |
| 4M2-HT, PC-14 |
EC4S010123 12 x 14 x 18 mm |
VITA SUPRINITY® PC VITA classical A1-D4®
| Description | Prod. no. 5 pcs. |
|---|---|
| A1-T, PC-14 |
EC4S010030 12 x 14 x 18 mm |
| A2-T, PC-14 |
EC4S010031 12 x 14 x 18 mm |
| A3-T, PC-14 |
EC4S010032 12 x 14 x 18 mm |
| A3.5-T, PC-14 |
EC4S010033 12 x 14 x 18 mm |
| B2-T, PC-14 |
EC4S010036 12 x 14 x 18 mm |
| C2-T, PC-14 |
EC4S010040 12 x 14 x 18 mm |
| D2-T, PC-14 |
EC4S010043 12 x 14 x 18 mm |
| A1-HT, PC-14 |
EC4S010130 12 x 14 x 18 mm |
| A2-HT, PC-14 |
EC4S010131 12 x 14 x 18 mm |
| A3-HT, PC-14 |
EC4S010132 12 x 14 x 18 mm |
| A3.5-HT, PC-14 |
EC4S010133 12 x 14 x 18 mm |
| B2-HT, PC-14 |
EC4S010136 12 x 14 x 18 mm |
| C2-HT, PC-14 |
EC4S010140 12 x 14 x 18 mm |
| D2-HT, PC-14 |
EC4S010143 12 x 14 x 18 mm |
VITA SUPRINITY® PC UNIVERSAL VITA SYSTEM
| Description | Prod. no. 5 pcs. |
|---|---|
| 0M1-T, PC-14 |
EN1S03024445 12 x 14 x 18 mm |
| 0M1-HT, PC-14 |
EN1S04024445 12 x 14 x 18 mm |
VITA SUPRINITY® PC UNIVERSAL VITA classi
| Description | Prod. no. 5 pcs. |
|---|---|
| A1-T, PC-14 |
EN1S03364445 12 x 14 x 18 mm |
| A2-T, PC-14 |
EN1S03374445 12 x 14 x 18 mm |
| A3-T, PC-14 |
EN1S03384445 12 x 14 x 18 mm |
| A3.5-T, PC-14 |
EN1S03394445 12 x 14 x 18 mm |
| B2-T, PC-14 |
EN1S03424445 12 x 14 x 18 mm |
| C2-T, PC-14 |
EN1S03464445 12 x 14 x 18 mm |
| D2-T, PC-14 |
EN1S03494445 12 x 14 x 18 mm |
| A1-HT, PC-14 |
EN1S04364445 12 x 14 x 18 mm |
| A2-HT, PC-14 |
EN1S04374445 12 x 14 x 18 mm |
| A3-HT, PC-14 |
EN1S04384445 12 x 14 x 18 mm |
| A3.5-HT, PC-14 |
EN1S04394445 12 x 14 x 18 mm |
| B2-HT, PC-14 |
EN1S04424445 12 x 14 x 18 mm |
| C2-HT, PC-14 |
EN1S04464445 12 x 14 x 18 mm |
| D2-HT, PC-14 |
EN1S04494445 12 x 14 x 18 mm |
VITA SUPRINITY® PC kits
VITA SUPRINITY® PC VITA SYSTEM 3D-MASTER
EC4S0STSETC3D
| Quantity | Content | Material |
|---|---|---|
| 12 | PC | inLab 0M1-HT, 1M1-HT, 1M2-HT, 2M2-HT, 3M2-HT, 4M2-HT, 0M1-T, 1M1-T, 1M2-T, 2M2-T, 3M2-T, 4M2-T |
| 1 | 75 ml | VITA AKZENT Plus GLAZE LT Spray |
| 1 | Firing tray W for crowns and bridges | |
| 1 | 2 Platinum pins (1 anterior and 1 posterior pin) | |
| 1 | VITA SUPRINITY Polishing Set clinical |
EC4S0STSETT3D
| Quantity | Content | Material |
|---|---|---|
| 12 | PC | inLab 0M1-HT, 1M1-HT, 1M2-HT, 2M2-HT, 3M2-HT, 4M2-HT, 0M1-T, 1M1-T, 1M2-T, 2M2-T, 3M2-T, 4M2-T |
| 1 | 75 ml | VITA AKZENT Plus GLAZE LT Spray |
| 1 | Firing tray W for crowns and bridges | |
| 1 | 2 Platinum pins (1 anterior and 1 posterior pin) | |
| 1 | VITA SUPRINITY Polishing Set technical |
VITA SUPRINITY® PC VITA classical A1-D4®
EC4S0STSETC
| Quantity | Content | Material |
|---|---|---|
| 16 | PC | inLab A1-T - 0M1-HT |
| 1 | 75 ml | VITA AKZENT Plus GLAZE LT Spray |
| 1 | Firing tray W for crowns and bridges | |
| 1 | 2 Platinum pins (1 anterior and 1 posterior pin) | |
| 1 | VITA SUPRINITY Polishing Set clinical |
EC4S0STSETT
| Quantity | Content | Material |
|---|---|---|
| 16 | PC | inLab A1-T - 0M1-HT |
| 1 | 75 ml | VITA AKZENT Plus GLAZE LT Spray |
| 1 | Firing tray W for crowns and bridges | |
| 1 | 2 Platinum pins (1 anterior and 1 posterior pin) | |
| 1 | VITA SUPRINITY Polishing Set technical |
VITA AKZENT® Plus
Optimizes everything. Effortlessly.
VITAVM®11
Fine-structure ceramic for individualization of VITA SUPRINITY PC.
VITA ADIVA® FULL-ADHESIVE
The fully adhesive bonding system with ideally matched components for material-specific and process-safe bonding of restorations made from various materials.
VITA ADIVA® SELF-ADHESIVE
The self-adhesive bonding system with ideally matched components for material-specific and process-safe bonding of restorations made from various materials.
VITA CERAMICS Polishing Set
For the pre- and high-gloss polishing of all ceramic materials.
VITA SUPRINITY PC – SYSTEM SOLUTIONS*
VITA offers VITA SUPRINITY PC with specific holder systems for the CAD/CAM systems:
- CEREC/inLab (Dentsply Sirona)
- PlanMill 40/PlanMill 40S/PlanMill 50S (Planmeca)
- MyCrown Mill (FONA Dental s.r.o.)
- Ceramill mikro IC/CeramillMotion 2/Ceramill Matik (Amann Girrbach AG)
VITA SUPRINITY PC – UNIVERSAL SOLUTIONS*
VITA offers VITA SUPRINITY PC with universal holder system for the CAD/CAM systems:
- CS 3000/CS 3100 (Carestream Dental, Inc)
- DMG ULTRASONIC Serie (DMGMori AG)
- CORiTEC Serie (imes-icore GmbH)
- Röders RXD Serie(Röders GmbH)
- N4/R5/S1/S2/Z4 (vhf camfacture AG)
- MILLING UNIT M Serie (Zirkonzahn S.r.l.)
- DGSHAPE DWX-4W(DGSHAPE Corporation)
- Zfx Inhouse5x (Zfx GmbH)
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Easy download for multiple documents
Download a .zip file containing all the selected files in a single step.Simply tick the files then click here.
Register for MyVITA now
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register now