It appears that you are currently in USA.
VITA CAD-Waxx is a residue-free acrylic polymer that can be fired and used for the computer-aided production of wax-ups in the press and casting technique. It is used as an aid for the digital wax-up technique.
VITA CAD-Waxx
Solutions for wax-ups and drilling templates.
Direct
Restorations can be tried in the mouth.
Efficient
Impressive wall and connector thicknesses can be defined for VMK substructures, which is why very little post-processing is required.
Flexible
Ground moulds can be combined with casting wax or the prefabricated parts known from casting procedures.
For the fabrication of pressed/cast objects and drilling templates
VITA CAD-Waxx blanks are transparent.
VITA CAD-Waxx products
VITA CAD-Waxx for inLab®
| Description | Prod. no. 10 pcs. |
|---|---|
| CW-40/15 |
EC4CW4010 14 x 15 x 40 mm |
VITA CAD-Waxx DISC
| Description | Prod. no. 1 pc. |
|---|---|
| Ø 98.4 x h 20 mm | ECCWD98201 |
VITA CAD-Waxx – SYSTEM SOLUTIONS*
VITA offers VITA CAD-Waxx with specific holder systems for the CAD/CAM systems:
- CEREC/inLab (Dentsply Sirona)
VITA CAD-Waxx – UNIVERSAL SOLUTIONS*
VITA offers VITA CAD-Waxx in a universal DISC geometry (Ø 98.4 mm) for the CAD/CAM system:
- inLab MC X5 (Dentsply Sirona)
Note: VITA CAD-Waxx DISCs can be processed with all open CAD/CAM systems, which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove).
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Easy download for multiple documents
Download a .zip file containing all the selected files in a single step.Simply tick the files then click here.
Register for MyVITA now
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register now