Instructions for use

Note:

• The VITA AKZENT Plus stain and glazing materials are available for characterization.
• Clean the pressed restorations with a steam jet prior to staining to remove grease or dirt residues.
• To intensify the shading, repeat the application of shade, instead of applying the shade more thickly.
• To improve the wettability, apply VITA AKZENT Plus Fluid to the surface to be stained.

Tip:

• This is how you can fire your restoration safely and reliably without firing paste.

Inlay: https://www.instagram.com/reel/CkLf4-xDv1s/

Crown: https://www.instagram.com/reel/Cck6Df1qPEq/

Please note:

• Restorations made of VITA AMBRIA and VITA LUMEX AC must be glazed with VITA AKZENT Plus GLAZE LT (powder, spray).
• Poor gloss will result if glaze material is applied too thinly. Avoid excessive application of glaze material and the formation of puddles.
• When using the glazing spray, spray the glaze on evenly from a distance of 10 to 15 cm while pressing the valve intermittently.
• The inner surfaces of the restoration must not be sprayed with the glazing spray.
• To increase durability, tempering can be done beforehand.

Note:

• For information on bonding restorations made of VITA AMBRIA, please refer to the brochure #10146 (bonding recommendations).