VITA VIONIC® TRY-IN RESIN
3D printing material for fabricating try-ins.

Cost effective
Fast and cost-effective production of immediate, replacement and final dentures, as well as temporary crowns/bridges using 3D printing.
Efficient
Reliable, reproducible fabrication of multiple dentures in a single process. Accelerated production and quality assurance through automated, validated processes and material properties.
Process secure
Benefit from perfected matched materials with proven VITA quality. Count on reliable workflows from a single source, combined with validated printers and post-curing units.
Indications
Individual functional try-ins of complete dentures
Couleurs
A2
Imprimantes validées :
- ASIGA Max/Mini
- ASIGA Max 2
- ASIGA Ultra
- ASIGA Pico2
- ASIGA PRO2
- ASIGA PRO 4K
- Rapid Shape D10/D20 Series
- Rapid Shape D30/D40 Series
- Rapid Shape D70/D90 Series
- Ivoclar PrograPrint PR5
- MICROLAY Versus
- Miicraft Ultra Series
- Straumann P Series
- W2P SolFlex
Unités de post-polymérisation validées :
- NK Optik Otoflash G171 N2
- NK Optik Otoflash 250
- Rapid Shape RS cure
- Rapid Shape RS cure XL
- Straumann P Cure
- Ivoclar ProPrint Cure
Unités de lavage validées :
- Ultrasonic Bath Bandelin Sonorex
- Rapid Shape RS wash
Téléchargement convivial pour plusieurs documents
Téléchargez une archive ZIP contenant tous les fichiers sélectionnés.Sélectionner simplement les fichiers puis cliquer ici.
M'enregistrer maintenant pour MyVITA
Il n'est possible d'accéder aux déclarations de conformité que via un accès MyVITA. Vous pouvez vous enregistrer pour MyVITA à l'aide du lien suivant.
M'enregistrer maintenantCan the resin in the tray be stored?
Yes, the resin can be stored in the tray temporarily between two printing jobs. It must be protected from light and stored at room temperature (14 – 25°C). Before each new print, ensure that no fragments from previous printing jobs have been left in the resin. If in doubt, the resin should be filtered through a fine sieve before reusing. It is also important to homogenize the resin in the tray before starting a new printing job. Here, a silicone spatula is used to mix the resin thoroughly in the tray.
What devices have been validated for use with VITA VIONIC TRY-IN RESIN?
VITA VIONIC TRY-IN RESIN is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab.
How many objects can I print if my bottle weighs 850 g / 600 g / 350 g?
Gross weight of the bottle |
Number of printed objects |
1100g |
approx. 60 pc. |
850g |
approx. 40 pc. |
600g |
approx. 20 pc. |
350g |
approx. 10 pc. |
How many try-ins can I print from 1 kg of resin?
Approx. 28 monoblocks or 60 try-ins (single jaw) can be printed from 1 kg of VITA VIONIC TRY-IN RESIN.
The actual number of printed objects that can be produced using 1kg of resin depends on several factors, such as the number of support structures, whether the resin is stored in the print tray or whether material is lost when it drips off.