CAD/CAM packaging
Starting in April 2024, the VITA CAD/CAM blocks will be gradually supplied in standardized folding boxes. This optimization will reduce the number of packaging variants from 12 to 6. The products will now be differentiated by their unique labeling. The exceptions will be the VITA YZ products over 55 mm, as well as VITA CAD-Waxx and VITA CAD-Temp over 65 mm in height, which will continue to be available in special packaging.

The new block packaging will no longer use foam inserts and will rely instead on a cardboard cavity that offers the products optimized protection. Instructions for use can be accessed digitally via QR codes on the packaging, which will reduce paper consumption.

DISC packaging

Significant improvements have also been made to the DISC packaging. Plastic foils and foam inserts have been replaced by environmentally friendly cardboard and cellulose half-shells, which will result in a significant reduction in waste. In addition, QR codes on the outer packaging will promote the digital availability of instructions for use, which will further reduce paper consumption.

The design of the new slipcases, which are now constructed as closed boxes with a fold-out base, has also been updated and adapted to match the design of the block packaging. The products will also be differentiated via labels, which will reduce the amount of packaging to a minimum.

Additional information:

Availability: Gradual introduction of the new packaging starting on April 1, 2024.

Please note: During the transition phase, there may be mixed deliveries.