VITA YZ T are Translucent ZrO2 blanks for natural, individual, fully veneered substructures.
VITA YZ T blanks are available in several versions:
- VITA YZ TWhite (unstained)
- VITA YZ TColor (monochromatic, tooth shades)
VITA YZ T are Translucent ZrO2 blanks for natural, individual, fully veneered substructures.
VITA YZ T blanks are available in several versions:
VITA YZ T is for:
* Bridges and bridge superstructures with maximum of two adjoining bridge pontics
*) VITA YZ TColor block geometries are only available in LL1
Discs (Ø 98.4 mm):
Blocks (mm):
VITA YZ TWhite / VITA YZ TColor
Description | Prod. no. 1 pc. | Prod. no. 2 pcs. | Prod. no. 4 pcs. |
---|---|---|---|
YZ-20/19 | - | - |
EC4YW3007804 20 x 19 x 15,5 mm |
YZ-40/19 | - |
EC4YW3008042 39 x 19 x 15,5 mm |
- |
YZ-55 | - |
EC4YW3008162 55 x 19 x 15,5 mm |
- |
YZ-65/25 |
EC4YW3008401 65 x 25 x 22 mm |
- | - |
Description | Prod. no. 1 pc. | Prod. no. 2 pcs. | Prod. no. 4 pcs. |
---|---|---|---|
YZ-20/19 | - | - |
EC4YW3617804 20 x 19 x 15,5 mm |
YZ-40/19 | - |
EC4YW3618042 39 x 19 x 15,5 mm |
- |
YZ-55 | - |
EC4YW3618162 55 x 19 x 15,5 mm |
- |
YZ-65/25 |
EC4YW3618401 65 x 25 x 22 mm |
- | - |
Description | Prod. no. 1 pc. |
---|---|
Ø 98.4 x h 12 mm | ECDYW3981200 |
Ø 98.4 x h 14 mm | ECDYW3981400 |
Ø 98.4 x h 16 mm | ECDYW3981600 |
Ø 98.4 x h 18 mm | ECDYW3981800 |
Ø 98.4 x h 20 mm | ECDYW3982000 |
Ø 98.4 x h 25 mm | ECDYW3982500 |
Description | Prod. no. 1 pc. |
---|---|
LL1/light, Ø 98.4 x h 14 mm | ECDYC3981461 |
LL1/light, Ø 98.4 x h 18 mm | ECDYC3981861 |
LL1/light, Ø 98.4 x h 20 mm | ECDYC3982061 |
LL2/medium, Ø 98.4 x h 14 mm | ECDYC3981462 |
LL2/medium, Ø 98.4 x h 18 mm | ECDYC3981862 |
LL2/medium, Ø 98.4 x h 20 mm | ECDYC3982062 |
LL3/intense, Ø 98.4 x h 14 mm | ECDYC3981463 |
LL3/intense, Ø 98.4 x h 18 mm | ECDYC3981863 |
VITA YZ T – SYSTEM SOLUTIONS*
VITA offers VITA YZ T blanks with a specific holder system for the CAD/CAM system:
VITA YZ T – UNIVERSAL SOLUTIONS*
VITA offers VITA YZ T blanks in a universal disc geometry (Ø 98.4 mm) for the CAD/CAM systems:
Note: VITA YZ DISCs can be processed with all open CAD/CAM systems, which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove).
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
**) Only with adapter for 98.4 mm discs
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register now