VITA ENAMIC multiColor is the hybrid ceramic blank for reproduction of the natural shade gradient at the push of a button. This CAD/CAM blank has an integrated shade gradient from cervical to incisal area.
VITA ENAMIC® multiColor
CAD/CAM blank made of hybrid ceramics
![](https://www.vita-zahnfabrik.com/portal/sap/medien/c/cc0/cc0c02/Buehne_ENAMIC_multiColor.jpg)
- fabricating durable restorations using a high-load capacity hybrid ceramic with absorption of masticatory forces
- non-/minimally invasive restorations possible since the elastic hybrid ceramic enables reduced wall thicknesses
- fabricating accurate, precise and delicate restorations using a hybrid material with integrated elasticity
- cost-effective reconstruction, thanks to time-saving CAM fabrication and efficient polishing without any firing process
Recommended indications*
- esthetic crown restorations with vivid play of color/light
- delicate (non-prep) veneers for cosmetic reconstructions
*) These are recommended indications; the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products.
VITA SYSTEM 3D MASTER®, high translucent (HT)
1M1, 1M2, 2M2, 3M2, 4M2
Blocks (mm):
- EMC-14 (12 x 14 x 18)
- EMC-16 (18 x 16 x 18)
VITA ENAMIC® multiColor products
VITA ENAMIC® multiColor for Cerec®/inLab
Description | Prod. no. 5 pcs. |
---|---|
1M1-HT, EMC-14 |
EC4EC4062765 12 x 14 x 18 mm |
1M1-HT, EMC-16 |
EC4EC4062885 18 x 16 x 18 mm |
1M2-HT, EMC-14 |
EC4EC4072765 12 x 14 x 18 mm |
1M2-HT, EMC-16 |
EC4EC4072885 18 x 16 x 18 mm |
2M2-HT, EMC-14 |
EC4EC4122765 12 x 14 x 18 mm |
2M2-HT, EMC-16 |
EC4EC4122885 18 x 16 x 18 mm |
3M2-HT, EMC-14 |
EC4EC4202765 12 x 14 x 18 mm |
3M2-HT, EMC-16 |
EC4EC4202885 18 x 16 x 18 mm |
4M2-HT, EMC-14 |
EC4EC4282765 12 x 14 x 18 mm |
4M2-HT, EMC-16 |
EC4EC4282885 18 x 16 x 18 mm |
VITA ENAMIC® multiColor UNIVERSAL VITA S
Description | Prod. no. 5 pcs. |
---|---|
1M1-HT, EMC-14 |
EN1EC4062765 12 x 14 x 18 mm |
1M1-HT, EMC-16 |
EN1EC4062885 18 x 16 x 18 mm |
1M2-HT, EMC-14 |
EN1EC4072765 12 x 14 x 18 mm |
1M2-HT, EMC-16 |
EN1EC4072885 18 x 16 x 18 mm |
2M2-HT, EMC-14 |
EN1EC4122765 12 x 14 x 18 mm |
2M2-HT, EMC-16 |
EN1EC4122885 18 x 16 x 18 mm |
3M2-HT, EMC-14 |
EN1EC4202765 12 x 14 x 18 mm |
3M2-HT, EMC-16 |
EN1EC4202885 18 x 16 x 18 mm |
4M2-HT, EMC-14 |
EN1EC4282765 12 x 14 x 18 mm |
4M2-HT, EMC-16 |
EN1EC4282885 18 x 16 x 18 mm |
VITAVM®LC
Light-curing, microparticle composite for extraoral use with fixed and removable restorations
VITA AKZENT® LC
Reliable reproduction of individual shade effects
VITA ENAMIC® Polishing Set
For simple pre- and high-gloss polishing of VITA ENAMIC hybrid ceramic
VITA ADIVA® FULL-ADHESIVE
The full-adhesive luting system with perfectly matched components for conditioning tooth substance and restorative material
VITA ADIVA® SELF-ADHESIVE
The self-adhesive luting system with perfectly matched components for conditioning the restorative material
VITA ENAMIC multiColor – SYSTEM SOLUTIONS*
VITA offers VITA ENAMIC multiColor with specific holder systems for the CAD/CAM systems:
- CEREC/inLab (Dentsply Sirona)
- PlanMill 40/PlanMill 40S/PlanMill 50S (Planmeca)
- Ceramill mikro IC/Ceramill Motion 2/Ceramill Matik (Amann Girrbach AG)
VITA ENAMIC multiColor – UNIVERSAL SOLUTIONS*
VITA offers VITA ENAMIC multiColor with universal holder system for the CAD/CAM systems:
- CORiTEC Serie (imes-icore GmbH)
- Röders RXD Serie (Röders GmbH)
- DGSHAPE DWX Serie (DGSHAPE Corporation)
- CS 3000/CS 3100 (Carestream Dental, Inc)
- Zfx Inhouse5x (Zfx GmbH)
- Milling UNIT M Serie (Zirkonzahn S.r.l.)
- N4/R5/S1/S2/Z4 (vhf camfacture AG)
- Organical Desktop Serie (R+K CAD/CAM Technologie GmbH)
- DMG ULTRASONIC-Serie (DMG Mori AG)
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Easy download for multiple documents
Download a .zip file containing all the selected files in a single step.Simply tick the files then click here.
Register for MyVITA now
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register now