Crowns and veneers made from lithium disilicate press ceramic – always reliable, with the right tooth shade!

Stephan Juckel is a big fan of press ceramic technology. What in hindsight almost began with bitterness, has now become a real stroke of luck: a modern lithium disilicate press ceramic. Stephan Juckel's initial experiences with the press technique were with press ceramics from a variety of manufacturers. "With our first attempts, we were practically doing voodoo dances around the furnace, praying that the objects would press properly", he remembers, smiling. Even the smallest changes in the process were the difference between success and failure. This unpredictability was a regular cause for frustration. Despite an effective shade system, the esthetic results were not always satisfactory. A gray sheen and, in some cases, a dull appearance – the results just weren't true to life.

The dental technician stuck to the task and broadened his horizons. He tested more press ceramics, weighed up different methods, and compared results. The differences in procedure were particularly noticeable. "Some systems required special laboratory equipment" – a knock-out criterion for this master dental technician. "I want to be able to work with the equipment I have (e.g., press furnace) and always get the same good results; easily and without complication." The condition of the surface, the accuracy of the fit and of course the photo-optical properties were all compared. "I wanted a brilliant true-to-life appearance without any grayish hue." Eventually, by coincidence, he discovered VITA AMBRIA lithium disilicate (VITA Zahnfabrik).

VITA AMBRIA impressed from the very first press. "We followed the working instructions and used our existing press furnace." The result was perfect. The pressed restoration surprised with incredible photo-optics; a result that matched the marketing brochure. Our first thought was that this had to be a coincidence. Yet all subsequent tests showed equally good results. Every surface was exactly the way we wanted it. Fit and shade are excellent. "It was love at first sight", says the master dental technician, thrilled.

During the test phase, Stephan Juckel completed several restorations using VITA AMBRIA. It was soon possible to say: tested and found to be flawless. "The results were always equally good and we decided relatively quickly to introduce VITA AMBRIA to our laboratory." The switch went smoothly. An introductory training was offered, but was not necessary. Pressing worked well right from the start. The results were exemplary and met all our requirements. After two and a half months, the press ceramic had established itself as part of our daily laboratory routine. "Although I am usually critical in my evaluation of materials, I did not have anything to complain about. That might sound odd, but it's a fact."

"The biggest challenge for ceramicists is the individual front tooth; this is where VITA AMBRIA shows its strength." In these situations, the cut-back technique is used. For veneering, VITA LUMEX AC (VITA Zahnfabrik) is used. The veneering ceramic is adapted to the press ceramic so that esthetics are conveniently created that impress with their internal play of colors and natural appearance. Brightness, translucency, opalescence – it's all exactly as it should be. Monolithic restorations made from the VITA AMBRIA press ceramic can also impress with exceptional vibrancy. "Pressing, devesting, polishing, placement and that's it."

And the clients of dental surgeons? Most dental surgeons noticed the change immediately; ". the new material has a very natural appearance." As a master dental technician, Stephan Juckel really appreciates this kind of feedback, which validates his decision.

Perhaps you are also looking for a "new" press ceramic. Here are the four things you should know about the VITA AMBRIA ceramic when thinking about a change. For Stephan Juckel, the esthetic appearance of the ceramic was and is of primary importance. "Today, we no longer get upset about undesirable shade gradients, but benefit with VITA AMBRIA from brilliant results with a true-to-life appearance.", says the master dental technician. Even without layered ceramic, the result is restorations with the effect of depth. And the processing time until the final result is ready? As a master dental technician, Stephan Juckel expects the press technique to offer simple, efficient application. "Since working with VITA AMBRIA, I have more time again for other things", he says happily. The time saved is due to the well-organized process and the excellent results directly from the press furnace.